Compare Blimps

Blimpworks blimps are quality commercial built indoor and outdoor airships, with our focus on safety, reliability and excellence. The “other” blimps are, at best, hobby quality.
| Blimpworks | The other guys | |
|---|---|---|
| Envelope | Proprietary 3.2 oz, 3-ply rip-stop nylon, not available to other manufacturers. Can be painted directly. | 3.5-mil polyurethane film (plastic, like beach ball material), prone to pinholes |
| Envelope life | 6–10 years | 1–2 years |
| Helium per season | 2–6 tanks · $200–$500 | 30–40 tanks · $2,000–$5,000 |
| Stays inflated | All season | Not between games |
| Motor vectoring | 360° | 180° |
| Turning | Hovers and spins in place, no forward speed needed | Tail rudder systems need a 40 ft turning radius |
| Gondola & props | Molded polystyrene gondola, guarded propellers | Fragile balsa gondola, unguarded propellers |
| Batteries | NMH, standard with every blimp | 1500 mAh or less NiCd |
Comparing the envelopes
Blimpworks blimps and airships are made of a very high quality proprietary fabric that is NOT available commercially to other blimp manufacturers. We use a 3.2 oz, 3-ply rip-stop nylon made specifically to our rigorous standards. Every square yard is quality control tested for consistent fabric weight, tear strength, tensile strength and permeability. All Blimpworks blimps can be directly painted. A six to ten year life for a Blimpworks blimp envelope is standard, not the exception.
The other guys’ blimps are made of a 3.5-mil polyurethane film. Its manufacturing process results in an abundance of pinholes that are difficult to locate, through which helium escapes and air is absorbed. Vinyl envelopes typically need replacing every one to two years, and the graphics must be reproduced on each new envelope, really increasing the cost.
Comparing the helium loss
The helium loss for a Blimpworks blimp is less than one-tenth of a percent (0.01%) by volume per day. A Blimpworks blimp kept inflated through a hockey or basketball season uses only 2–3 tanks of helium beyond the initial inflation. Helium costs for a Blimpworks blimp are less than $200 every six months.
A 3.5-mil polyurethane blimp usually needs a full tank or more every time it flies, plus top-ups during the same day. Helium usage can easily be 30 to 40 tanks per season, or $2,000 to $5,000.
Electronics, mechanics & flying features
Powered by Airworks Enterprises, Blimpworks blimps come equipped with the highest quality radios, servomotors, speed controllers and components. The molded polystyrene gondola is lightweight and durable. Forward propellers are guarded by nylon webbing and shrouded on the sides. Complete 360 degree vectoring lets our blimp take off straight up, fly in reverse as well as forward, and hover in one position while spinning 360 degrees. This lets the pilot bring the blimp to more fans and navigate into all the “nooks and crannies” of your facility.

